Seamless Precision steel tubes from China manufacturer

Place of Origin:

Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Seamless Precision steel tubes

The seamless precision steel tubescan be used for a wide range of precision mechanical spare for car andcylinder accord to standard DIN2391/ EN10305-1/ GB/T3639-2009.

Seamless Precision Steel Tubes according to EN 10305-1

Standard: DIN2391 part 2 , DIN EN10305-1, DIN17175 etc;
Material: ST35,ST45,ST52.
Manufacturing method: cold-rolled / cold-drawn
Delivery condition: BK,BKS,SR,GBK,NBK.
Certificate: Factory Certification: 2.2 according to EN; Acceptance Test Certificate:3.1 according to EN 10204
Packing:: in bundles tied with steel strips. External packing by wooden cases if the wall thickness/OD ratio is low.; Oil-coating is generally necessary especially for export.
Application:
Usedin hydraulic & pneumatic cylinder ,automobile and other mechanicaldevice .Feature: high precision and high brightness, the inner and outersurface of the tubes have high cleanness without oxid, mechanicalproperties of the final tubes also come out excellent, promising noleakage under high pressure, no deformation after cold-bent and nocracks when flaring and flattening, ensuring the efficient operation inall service.

NBK means protective heat-treating under the non-oxidation enviroment to get a bright and smooth surface for the tubes.

DIN 2391-81 Part 2 Seamless Precision steel tubes(DIN2391-81)

Standard DIN 2391defines the technical delivery conditions for seamless precision steeltubes according to DIN 2391 Part 1 which are made from the steel gradeslisted in section 5.
Tubes according to thisStandard are mainly used where accuracy to dimension and, possibly,small wall thicknesses and good surface condition are required.

Chemical composition(%)

Code number	Material number	Mfg. Process	C max	Si max	Mn max	P max	S max
St35	1.0308	S	0.17	0.35	0.4	0.05	0.05
St45	1.0408	S	0.21	0.35	0.4	0.05	0.05
St52	1.0508	S	0.22	0.55	1.6	0.05	0.05

Mechanical and technological properties

Code number	Material number	Cold-finished hard(BK)		Cold-finished/soft (BKW) 3)
Code number	Material number	Rm(Mpa)	A(%)	Rm(Mpa)	A(%)
St 35/E235	1.0308	480	6	420	10
St 45	1.0408	580	5	520	8
St 52/E355	1.0508	640	4	580	7

Code number	Cold finished (soft)(BKW)			Annealed (GBK)		Normalized (NBK)
Code number	Rm(Mpa)	ReH (Mpa)	A(%)	Rm(Mpa)	A(%)	Rm (Mpa)	ReH (Mpa)	A(%)
St 35/E235	420	315	14	315	25	340-470	235	25
St 45	520	375	12	390	21	440-570	255	21
St 52/E355	580	450	10	490	22	490-630	355	22

Note:

The yield point for theannealed (GBK)condition on delivery is at least 50% of the (ultimate)tensile strength. Depending upon the degree of deformation in thedrawing operation, the yield point of tubes delivered in thecold-finished/hard (BK)and cold-finished/soft(BKW) conditions, may beincreased to a level close to the tensile strength.
In calculating the yieldpoint, the following values are recommended : cold-finished/hardcondition on delivery ≥ 80% of the tensile strength, cold-finished/softcondition on delivery ≥ 70% of the tensile strength.

Quality grade

The tubes are supplied in the following quality grades :

A) precision steel tubesintended primarily for mechanical stressing, without any particularquality requirement and without acceptance test certificate.
B)precision steel tubes intended primarily for mechanical stressing, withspecial quirement and exclusively with acceptance test certificate.
C)precision steel tubes with special requirement according to section 12.Theses requirements and corresponding tests must be agreed, with thecustomer having to specify his requirements at the time of enquiry andon ordering.

Condition on delivery:

Term	Symbol	Explanation
Cold-finished/hard (cold-finished as-drawn)	BK	No heat treatment after the last cold-forming process. The tubes therefore have only low deformability.
Cold-finished/soft (lightly cold-worked)	BKW	After the lastheat treatment there is a light finishing pass (cold drawing) Withproper subsequent processing, the tube can be cold-formed (e.g. bent,expanded) within certain limits.
Annealed	GBK	After the final cold-forming process the tubes are annealed in a controlled atmosphere or under vacuum.
Normalized	NBK	The tubes are annealed above the upper transformation point in a controlled atmosphere or under vacuum.

Didn't find what you're looking for? Post Buying Lead or contact HiSupplier Customer Service Center for help!

Find more related products in following catalogs on Hisupplier.com

Minerals & Metallurgy >> Iron & Steel >> Steel >> Steel Pipes